Removing the power-button board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the
3
Remove the
4
Remove the
5
Remove the
6
Remove the
7
Remove the
8
Remove the
9
Remove the battery.
10 Remove the
Procedure
1
Remove the two screws (M2x3) that secure the power-button board to the
palm-rest assembly.
2
Lift the power-button board, along with its cable, off the palm-rest assembly.
base
cover.
wireless
card.
memory
modules.
solid-state
drive.
rear-I/O
cover.
computer
base.
coin-cell
battery.
heat-sink
assembly.
system
board.
computer. After working inside your
After working inside your
computer.
63