Removing The Computer Base; Prerequisites; Procedure - Alienware 15 R3 Service Manual

Removing the computer base

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the
3 Remove the
4 Remove the

Procedure

1 Remove the eleven (M2.5x6L) screws that secure the computer base to the
palm-rest assembly.
2 Remove the (M2x3) screw that secures the computer base to the palm-rest
assembly.
base cover.
solid-state drive.
wireless card.
rear-I/O cover.
computer. After working inside your
After working inside your computer.
33