Removing The Rear-I/O Cover; Prerequisites; Procedure - Alienware 15 R3 Service Manual

Removing the rear-I/O cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Prerequisites

Remove the base

Procedure

1 Remove the two screws (M2.5x6L) that secure the rear-I/O cover to the
palm-rest assembly.
2 Using a plastic scribe, gently release the tabs that secure rear-I/O cover to
the computer base.
30
computer. After working inside your
cover.
After working inside your computer.