Removing The Power-Button Board; Prerequisites; Procedure - Alienware M18x R2 Owner's Manual

15
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery pack. See "Removing the Battery Pack" on page 12.
2 Remove the base cover. See "Removing the Base Cover" on page 14.
3 Remove the center control cover. See "Removing the Center Control Cover" on
page 26.

Procedure

1 Disconnect the power-button board cable from the system-board connector.
2 Remove the screws that secure the power-button board to the palm-rest assembly.
3 Lift the power-button board off the palm-rest assembly.
1
1 power-button board
3 system-board connector
30
|

Removing the Power-Button Board

Removing the Power-Button
Board
Before working inside your computer, read the safety
2
2 screws (2)
3