Table of Contents
Advertisement
Procedure
CAUTION: Place the computer on a clean, flat surface.
1
Turn the computer over.
2
Disconnect the logo-board cable from the system board.
3
Using the pull-tab, disconnect the power-button board cable from the system
board.
4
Open the latch and disconnect the display cable from the system board.
5
Turn the computer over.
6
Remove the screw (M2.5x6L) that secures the USB Type-C port bracket to
the system board and lift the USB Type-C port bracket off the system board.
7
Disconnect the power-adapter port cable from the system board.
8
Disconnect the speaker cable from the system board.
9
Open the latch and disconnect the keyboard cable from the system board.
10 Open the latch and disconnect the keyboard-backlight cable from the system
board.
52
Advertisement
Table of Contents
