Replacing The Base Cover; Procedure - Alienware 15 R3 Service Manual

Replacing the base cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Procedure

1 Connect the battery cable to the system board.
2 Slide the tabs on the base cover into the slots on the computer base and snap
the base cover into place.
3 Tighten the five captive screws that secure the base cover to the computer
base.
computer. After working inside your
After working inside your computer.
17