Removing The Speakers; Prerequisites; Procedure - Alienware 15 R3 Service Manual

Hide thumbs Also See for 15 R3:
Table of Contents

Advertisement

Removing the speakers

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2
Remove the
3
Remove the
4
Remove the
5
Remove the
6
Remove the
7
Remove the
8
Remove the battery.
9
Remove the
10 Remove the

Procedure

1
Remove the screw (M2x3) that secures the speaker to the palm-rest assembly.
2
Lift the left speaker off the palm-rest assembly.
3
Peel off the tape that secures the speaker cable to the palm-rest assembly.
4
Remove the speaker cable from the routing guides on the palm-rest assembly.
base
cover.
wireless
card.
solid-state
drive.
memory
modules.
rear-I/O
cover.
computer
base.
coin-cell
battery.
heat-sink
assembly.
system
board.
computer. After working inside your
After working inside your
computer.
57

Advertisement

Table of Contents
loading

Table of Contents