Power Button; Removing The Power Button - Alienware m17 R5 AMD Service Manual

Steps
1. Connect the USB board to the system-board assembly.
2. Align the screw holes on the USB board with the screw holes on the system-board assembly.
3. Replace the two screws (M2x4) that secure the USB board to the system-board assembly.
4. Turn the system-board assembly over.
Next steps
1. Follow the procedure from step 6 to step 25 in
2. Install the rear-I/O cover.
3. Install the wireless card.
4. Install the M.2 2230 solid-state drive
5. Install the M.2 2230 solid-state drive
6. Install the memory module.
7. Install the base cover.
8. Follow the procedure in

Power button

Removing the power button

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the memory module.
4. Remove the M.2 2230 solid-state drive
5. Remove the M.2 2230 solid state drive
6. Remove the wireless card.
7. Remove the rear-I/O
8. Follow the procedure from step 1 to step 20 in
or M.2 2280 solid-state drive
or M.2 2280 solid-state drive
After working inside your
Before working inside your
or M.2 2280 solid-state drive
or M2 2280 solid-state drive
cover.
Removing the system
Installing the system board.
in slot one, whichever applicable.
in slot two, whichever applicable.
computer.
computer.
in slot one, whichever applicable.
in slot two, whichever applicable.
board.
63