Table of Contents
Advertisement
Replacing the computer base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the computer base with the screw holes on the palm-
rest assembly.
2
Replace the two (M2.5x6L) screws that secure the computer base to the
palm-rest assembly.
3
Replace the (M2x3) screw that secures the computer base to the palm-rest
assembly.
4
Replace the eleven (M2.5x6L) screws that secure the computer base to the
palm-rest assembly.
Post-requisites
1
Replace the
2
Replace the
3
Replace the
4
Replace the
36
rear-I/O
cover.
wireless
card.
solid-state
drive.
base
cover.
computer. After working inside your
After working inside your
computer.
Advertisement
Table of Contents
