Furuno FCR-2127 Installation Manual page 77

Example1
No.1 Radar
Chart radar
Radar
transceiver
1 X-band
Chart
processor
EC-1000C
Setting on EC-1000C of the chart radar 1
Own radar is No.1 and chart radar.
So the settings for "Radar transceiver",
"Connected", "Device interface" are
shown in the figure right.
You can put any name on the Label to
distinguish from other radar.
Enter actual distance (m) from No.1
radar antenna to the conning position.
No. 2 radar is x-band chart radar.
So, the setting is shown in the figure
right.
No. 2 Radar
Chart radar
Radar
transceiver
2 X-band
Chart
processor
EC-1000C
3. SETTING AND ADJUSTMENT
No.3 Radar
IMO radar
Radar
transceiver
3 S-band
Xband1
Xband2
No. 4 Radar
None
3-31