Table of Contents
Advertisement
Dual-axis log setting
Settings when using
IEC-61162-1.
Settings when no
dual-axis log is
available.
Notes:
• Talker identifier can be defined for IEC 61162-1 (typical talker for dual axis log is VD). If
talker identifier is defined as XX, then it is ignored.
• IEC 61162-1 uses VBW.
• If you selected VBW message, then bottom track is available from dual-axis log and water
track could be available from log.
• DS-30 is a special device Furuno DS-30.
3. SETTING AND ADJUSTMENT
3-29
Hide quick links:
Advertisement
Table of Contents
