Setting Radar Number - Furuno FCR-2127 Installation Manual

3.4

Setting Radar Number

If multiple radars are connected using the network hub, set as
follows.
1. Turn on a chart radar that you want to change its number.
2. Connect the USB memory which contains "service.pas" file.
If you do not have a USB memory, enter the password to
access to the menu. When the window for password appears
on the display, enter "6", "1", "4", "2" ("M+GA" shown on the
display), and click the left button and the OK button to show the
installation parameters menu.
3. Press the MENU key on the control unit to show the Main
Menu.
4. Roll the wheel to choose "Initial Settings" to show INITIAL
SETTINGS dialog box.
5. Rotate the trackball to place the cursor on the
appears.
INITIAL SETTINGS
Set values
Datum
WGS 84
Position
discrepancy limit
0.00 NM
[ Initial Settings ]
Function keys
Operation
Installation params
Priority Alert
Chart Alert params
Radar Initialize
NAV params
Selftest
TT Test
Close
3. SETTING AND ADJUSTMENT
[Main Menu]
Chart Menu
MOB
Event
Record
Safety Message
AIS Own Ship Info
Set Primary Display
Initial Settings
Alarms
TT+AIS
Sensors
Picture
Mark
Echo
Route Monitor
User Chart
Notes
Close
mark. The "Initial Settings" menu
3-7