Table of Contents
Advertisement
Figure 11
Restore prior
firmware version
Activate Boot Location dialog box
2. Click on the version you want to activate.
3. Click OK.
4. Choose Reset System from the File menu to make the version
active. Now the newest version becomes active and the prior
version is saved as inactive.
5. Close and restart the web browser to load the Element Manager
from the new version. After resetting the SAN Router, it may take
two or three minutes for the SAN Router's embedded web server
to become ready.
To restore the prior firmware version in the event you experience
problems on the network with the new version, use the following
procedure.
1. Select Firmware Upgrade from the File menu.
2. Click the Activate button to display the Activate Boot Location
dialog box
(Figure 11
3. Click on the prior (now inactive) version in the Activate Boot
Location dialog box, then click OK.
4. Choose Reset System from the File menu to make the version
active.
on page 45).
Chapter 3: Maintenance and troubleshooting
45
Advertisement
Table of Contents
Troubleshooting
