Configuring The Ups For Ebms; Ups Shutdown - Eaton 9355 User Manual

Configuring the UPS for EBMs

To ensure maximum battery runtime, configure the UPS for the correct number of EBMs:
1. Press any button on the front panel display to activate the menu options.
2. Using the
3. Press the
4. Using the
5. Use the
All 2-High UPS and EBM Cabinets*
UPS + 1 EBM
UPS + 2 EBMs
UPS + 3 EBMs
UPS + 4 EBMs
All 3-High UPS and EBM Cabinets*
UPS + 1 EBM
UPS + 2 EBMs
UPS + 3 EBMs
* UPS-32 models contain 2 strings; EBM-64 models contain 4 strings.
UPS-64 models contain 4 strings; EBM-96 models contain 6 strings.
6. Press the
7 . Press the

UPS Shutdown

To shut down the UPS:
1. Press any button on the front panel display to activate the menu options.
2. Press the
OFF menu.
3. Press the
4. Press and hold the
The UPS stops supplying power to the load.
5. Switch the UPS battery circuit breaker to the OFF position.
The UPS disconnects from the batteries and is on logic power only.
6. Switch off utility power where the UPS is connected.
button, scroll to the Settings menu.
(
button twice to select the User Settings menu.
button, scroll to the Number of Battery Strings option and press the
or buttons to select the number of strings according to your UPS configuration:
button to save the setting.
button until the Eaton logo appears.
button on the front panel display and then press the
button to select the TURN UPS OFF option.
button for three seconds, until the UPS stops beeping.
Eaton 9355 UPS (10/15kVA) User's Guide 164201594—Rev G
Number of Strings
6
10
14
18
Number of Strings
10
16
22
button to select the TURN UPS ON/
www.eaton.com/powerquality
Operation
button.
67