Table of Contents
Advertisement
0 Lux Night View Function
¢The 0 Lux Night View Function should not be used
in brightly-lit places, and the Movie Camera should
not be directed toward the sun. Otherwise,
irreparable damage may occur.
Scenes taken by:the 0.Lux Night View Function
are played back in black and white.
When recording with the 0 Lux Night View
Function, operating the shutter speed, iris and
white balance is not possible.
While the 0 Lux Night View Function is operating,
you cannot use any of the Programme AE Modes.
@When the 0 Lux Night View Function is in use, the
subject should be within 3 metres of the Movie
Camera.
When the automatic focusing is not precise, adjust
the focus manually. (-» 29) (In this case, the
Manual Focus Mode is activated when the
[FOCUS] Button is pressed even then.the Movie
Camera is in the Full Auto Mode.)
Wi Programme AE
lf any of the Programme AE Modes is selected,
you cannot adjust the shutter speed (-> 28) or irls
(+ 29).
You cannot use Sports Mode, Portrait Mode or
Low-Light Mode with Gain-up Mode [GAINUP].
Sports Mode ©
® During normal playback, the image movement
may not look smooth.
Because the colour and brightness of the
playback image may change, avoid recording
under fluorescent light, mercury light, or
sodium light.
elf you record a subject illuminated with strong
light or a highly reflective subject, vertical lines
of light may appear.
/f the light is insufficient; the [ 4 ] Indication
flashes,
:
¢\f this mode is used for indoor recording,
playback images may flicker.
Sports Mode/Portralt Mode
lf you record a still picture in Progressive
Photoshot Mode, the brightness and hue of
the recorded still picture may become
unstable,
Low Light Mode
extremely dark scenes may not be able to be
made brighter to a satisfactory degree.
Spotlight Mode
eWith this mode, recorded images may tum out
to be extremely dark.
elf the recording subject is extremely bright, its
recorded image may turn out to be whitish.
Surf & Snow Mode
lf the recording subject is extremely bright, its
recorded image may turn out to be whitish.
White Balance
You cannot change White Balance if you set
[EFFECT] of [DIGITAL EFFECT] Sub-Menu on the
[CAMERA FUNCTIONS] Main-Menu to [GAINUP].
In the following cases, the [4] Indication
flashes:
© The flashing indicates that the previously adjusted
White Balance setting is still kept. This setting will
be kept until White Balance is adjusted again.
You may not be able to achieve correct White
Balance Adjustment manually under weak
illumination.
Wi Manual Shutter Speed Adjustment
© You may see vertical lines of light in the, playback
image of a brightly shining subject or highly
reflective subject.
@ During normal playback, movement in the images
may not look smooth.
Because the colour and brightness of the playback
image may become unstable, avoid recording
under fluorescent light, mercury light, or sodium
light.
.
If you are using either Gain-up Mode (> 30) or
Programme AE Mode (=> 26), you cannot adjust
the shutter speed. If the shutter speed was
adjusted manually, this setting wil! be cancelled.
Hi Manual Iris Adjustment
Depending on zoom magnification, there are iris
values that will not be displayed.
#{f you are using Programme AE Mode (> 26), you
cannot adjust the iris. If the iris is adjusted
manually, this setting will be cancelled.
If you attempt to adjust the Shutter Speed after
setting the Iris, the value set for the Iris will be
cancelled.
Advertisement
Table of Contents
