Setting Up A Connection Manually - Panasonic HC-WXF990M Operating Instructions Manual

7
(When there is an Encryption key (Password))
Enter the Password.
≥ For details on how to enter characters, refer to page 117.
≥ When the entry is complete, touch [Enter].
≥ A message is displayed when the connection is complete. Touch [EXIT], and exit [Set Wireless
Access Point].
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j

Setting up a connection manually

≥ When connecting by [Set Manually], confirm the SSID (Identification name), Authentication
method, Encryption type, and Encryption key (Password) of the wireless access point you are
using.
1
Press Wi-Fi button on this unit.
2
Touch [Wi-Fi Setup].
3
Touch [Set Wireless Access Point].
4
Touch the part with no display of a wireless
access point C.
≥ For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 199.
5
Touch [Set Manually].
6
Touch [INPUT], then enter the SSID of the
wireless access point to be connected.
≥ For details on how to enter characters, refer to page 117.
≥ When the entry is complete, touch [Enter].
7
Touch the desired Network Authentication method.
Network authentication type
[Open]
[WEP]
[WPA-PSK]/[WPA2-PSK]
≥ When [WEP] is selected, proceed according to step 9.
8
Touch the desired Encryption method.
≥ If you select [NONE], a message is displayed after completing the connection. Touch [EXIT], and
exit [Set Wireless Access Point].
Encryption types that can be set
[NONE]/[WEP]
There is no setup of an encryption types.
[TKIP]/[AES]
- 193 -
  
A [Delete]
B [EXIT]
