Nd Filter; Switching The Screen Indications/Mode Information Display - Panasonic AG-UX90 Operating Instructions Manual

ND filter

Using the ND filter switch, you can switch the built-in optical ND filter setting. (The filter adjusts the
amount of light.)
≥ Use this function when recording a bright subject outdoors under a clear sky that causes the
screen to look white.
Slide the ND filter switch.
ND1/16

1/64:
1/16:
1/4:
OFF:
≥ If the selected setting 1/64, 1/16 or 1/4 does not match an ND filter setting recommended by this
unit, the recommended setting will be displayed on the screen, blink for approximately 5 seconds
and disappear.
≥ A recommend ND filter setting may not be displayed correctly in scenes that are too dark.
Switching the screen indications/mode information
display
DISP/MODE CHK button
When the DISP/MODE CHK button is pressed, all screen displays disappear, except for the
counter display, time stamp display*, zebra pattern display, marker display, and safety zone
display. (l 181)
* When [DATE/TIME] is set to [TIME], [DATE], or [DATE&TIME]
≥ To cancel the setting, press the DISP/MODE CHK button.

ND1/64
Reduces the amount of light to 1/64.
Reduces the amount of light to 1/16.
Reduces the amount of light to 1/4.
Does not use the ND filter.
A ND filter setting
B Recommended ND filter setting
- 99 -