Installing The Soft Top - Two-Door Models - Jeep WRANGLER 2017 Owner's Manual

NOTE: To aid in disconnecting the knuckles, you may
carefully tap on the knuckles using a rubber mallet.
Step Four
5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx
head driver. Recover and re-zip the sports bar cover.
Store the pivot brackets and screws in a safe place.
6. Reinstall the hard top. Refer to "Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Installa-
tion" in this section.
GETTING TO KNOW YOUR VEHICLE 73
Installing The Soft Top — Two-Door Models
NOTE: The following procedures are for first time set up
only. For future soft top procedures, refer to "Soft Top" in
this section.
1. Locate and remove the following items prior to hard top
removal:
• Right and left door frames
• Door frame attachment knobs (four for two-door mod-
els, six for four-door models)
• Right and left quarter windows
• Rear window
2. Remove the hard top. Refer to "Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Removal"
in this section.
3. Install the door frames. Refer to "Door Frame" in this
section.
3