Jeep WRANGLER 2017 Owner's Manual page 99

Step Three
4. Loosely install the rear knob (long knob) to hold the
door rail in position.
5. Carefully set the front of the front door frame in the
rubber seal at the top of the windshield.
GETTING TO KNOW YOUR VEHICLE 97
Step Five
6. Clip the front of the door rail over the side bar making
sure that the material for the side bar cover is not
pinched by the door frame.
7. Position the rear of the front door frame to lay on top of
the front of the rear door frame. Ensure the seals are
installed correctly to avoid water leaks.
3