Installing The Soft Top - Two-Door Models - Jeep Wrangler 2014 Operating Information Manual

5. Unzip the zipper on the sport bar cover to expose the
pivot brackets. Remove the brackets using a #T30 Torx®
head driver. Recover and re-zip the sports bar cover.
Store the pivot brackets and screws in a safe place.
6. Reinstall the hard top. Refer to "Freedom Top™ Three-
Piece Modular Hard Top — Front/Rear Panel Instal-
lation" in this section.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193
Installing The Soft Top — Two-Door Models
NOTE: The following procedures are for first time set up
only. For future soft top procedures, refer to "Soft Top" in
this section.
1. Locate and remove the following items prior to hard
top removal:
• Right and left door frames
• Door frame attachment knobs (four for two-door
models, six for four-door models)
• Right and left quarter windows
• Rear window
2. Remove the hard top. Refer to "Freedom Top™ Three-
Piece Modular Hard Top — Front/Rear Panel Re-
moval" in this section.
3. Install the door frames. Refer to "Door Frame" in this
section.
3