Jeep WRANGLER 2017 Owner's Manual page 122

Hide thumbs Also See for WRANGLER 2017:

Table of Contents

120 GETTING TO KNOW YOUR VEHICLE

6. Open the header latches and engage the hook on each

side onto the windshield loops (do not close the latches).

7. If the swing gate brackets were removed, install them by

hooking the rear edge of the bracket on the interior side

of the body channel. Then, rotate it rearward and over

the channel until it snaps onto the exterior part of the

rail. To be properly located, the bracket must only be

clipped to the shortened rail edge.

Chapters

Table of Contents

Wrangler 2017