Dial By Saying A Number; Call By Saying A Name - Jeep WRANGLER 2017 Owner's Manual

• You will then be asked to give your mobile phone a
priority level between one and seven, with one being the
highest priority. You can pair up to seven mobile phones
to your Uconnect Phone. However, at any given time,
only one mobile phone can be in use, connected to your
Uconnect System. The priority allows the Uconnect
Phone to know which mobile phone to use if multiple
mobile phones are in the vehicle at the same time. For
example, if priority three and priority five phones are
present in the vehicle, the Uconnect Phone will use the
priority three mobile phone when you make a call. You
can select to use a lower priority mobile phone at any
time (refer to "Advanced Phone Connectivity" in this
section).

Dial By Saying A Number

• Push the Phone
button to begin.
• After the "Ready" prompt and the following beep, say
"Dial."
• The system will prompt you to say the number you want
to call.
• For example, you can say "234-567-8901."
• The Uconnect Phone will confirm the phone number
and then dial. The number will appear in the display of
certain radios.

Call By Saying A Name

• Push the Phone
button to begin.
• After the "Ready" prompt and the following beep, say
"Call."
• The system will prompt you to say the name of the
person you want to call.
• After the "Ready" prompt and the following beep, say
the name of the person you want to call. For example,
you can say "John Doe," where John Doe is a previously
stored name entry in the Uconnect phonebook or down-
loaded phonebook. To learn how to store a name in the
phonebook, refer to "Add Names To Your Uconnect
Phonebook," in this section.
• The Uconnect system will confirm the name and then
dial the corresponding phone number, which may ap-
pear in the display of certain radios.
MULTIMEDIA 473
10