Door Frame Installation - Two-Door Models - If Equipped - Jeep WRANGLER 2017 Owner's Manual

Door Frame Installation — Two-Door Models — If
Equipped
1. Unfold door frame and unscrew thumbscrews.
2. Set the door frame pin into the hole on top of the body
side, behind the door opening.
Step Two
3. After the door frame pin has been set into the body side
hole, carefully set the front of the door frame into the
rubber seal at the top of the windshield.
GETTING TO KNOW YOUR VEHICLE 95
4. Starting with the front of the door frame, clip it over the
metal side bar and then clip the rear, making sure that
the material for the side bar covers is not pinched by the
door frame.
Step Four
3