Front Panel(S) Installation - Jeep WRANGLER 2017 Owner's Manual

88 GETTING TO KNOW YOUR VEHICLE
6. Lift the Freedom bag into the vehicle with the hooks and
straps facing the back of the rear seat. Attach the clips at
the bottom of the bag to the child restraint anchorages,
located at the base of the rear seat.
Step Six
7. Wrap the upper strap around the rear head restraints
and loop the strap through the buckle. Pull on the strap
to tighten the Freedom bag securely against the rear
seat.
Step Seven

Front Panel(s) Installation

NOTE: Set the panels on the windshield frame so that
there is no overhang. Also, make sure that the panels are
sitting flush with the body.
1. Install the right panel first, then the left panel.
2. Reinstall the panel(s) using the same steps for removal
in reverse order.