Centre Stand; Owner's Tool Kit - Malaguti F10 User Manual

3.14 CENTRE STAND


The centre stand position is not electronically controlled;
therefore you can turn the engine on while the vehicle
2
is parked. To place the vehicle on the stand, push pin
(A‑Fig.15) and raise the vehicle.
3
During this manoeuvre, hold the vehicle in place
to prevent it falling over.
4
We suggest to frequently check the holding system
of both stands, that is their tension springs.
5
Do not sit on the scooter when it is parked on the
stand.
6
ENG
6

3.15 OWNER'S TOOL KIT

The vehicle is equipped with a set of tools that you will
find under the seat (Fig.16):
A Spark plug wrench / screwdriver
B L‑shaped wrench
A
Fig.15
A B
Fig.16