Front Rack And Fender Installation - Argon 18 Dark Matter Manual

21.

Front Rack and Fender Installation

4Nm 2Nm
4.5Nm
4 4 2
+20mm
5Nm HT
0.5-1Nm
4 2 2
40Nm
12Nm 2Nm
8
2.5
35Nm
3Nm
8
T25
M5 screw
12mm
3Nm
3
4Nm
T25
3Nm
4
HT
2.5
17mm
• The thread length on the front and rear upper screw is more than 20mm.
• The thread insertion on the interior hole for fenders is 12mm. Ensure 12mm or
less of visible threads once the fender is screwed on.
• The thread insertion on the exterior hole for the rack is 17mm. Ensure 17mm
or less of visible threads once the rack is screwed on.
• All screws must be torqued to a maximum of 3Nm. Apply grease to the
threads.