Configuring Qos In An Epon System; Qos Configuration Task List In An Epon System - H3C S7500E Series Configuration Manual

Configuring QoS in an EPON System

QoS Configuration Task List in an EPON System

QoS configurations in an EPON system are the same as those in Ethernet, and the corresponding
configuration commands in OLT port view and ONU port view are the same as those in Ethernet port
view too. For detailed configuration, see the corresponding chapters above.
Table 13-1 and
system.
Table 13-1 Configure QOS at the OLT side of an EPON system
Configure QoS for uplink
traffic
Configure QoS for downlink
traffic
Table 13-2 show how to configure QoS for downlink traffic and uplink traffic in an EPON
QoS at the OLT side
Configure priority mapping on the
OLT
Configuring priority trust mode for
the OLT port
Configure traffic policing for uplink
traffic of all ONUs (through QoS)
Configure congestion management
on the uplink port
Configure the OLT to perform
priority mapping for traffic received
on an uplink port
Configure congestion management
(SP and WRR) on the downlink
OLT port
Configure the high-priority queue
buffer for the specified ONU
Configure line rate and traffic
shaping for downlink traffic
Reference
Modify the priority mapping on the OLT
port
Configuring the Priority Trust Mode on
a Port
Configuring Traffic Policing
Configuring SP Queuing
Configure WRR Queuing
Configuring WFQ Queuing
Configuring SP+WRR Queues
Modify the priority mapping on the OLT
port
Configuring SP Queuing
Configure WRR Queuing
Configuring WFQ Queuing
Configuring SP+WRR Queues
Sending buffer size of the OLT port
Configuring GTS
Configuring the Line Rate
13-6