Configuring Qos At The Olt Side - H3C S7500E Series Configuration Manual

Table 13-2 Configure QoS at the ONU side of an EPON system
Configure QoS for uplink
traffic
Configure QoS for downlink
traffic

Configuring QoS at the OLT side

Modify the priority mapping on the OLT port
Follow these steps to modify the 802.1p-to-local mapping on the OLT port:
To do...
Enter system view
Enter OLT port view
Modify the 802.1p-to-local
mapping on the OLT port for
downlink or uplink traffic
QoS at the OLT side
Assign downlink bandwidth for each
ONU
QoS at the ONU side
Configuring traffic classification and
CoS priority marking for incoming
packets on UNIs
Configure priority trust mode for the
ONU
Configuring traffic policing for uplink
traffic of a UNI
Configure congestion management for
the uplink port of an ONU
Configure the ONU to perform priority
mapping for downlink traffic from the
OLT according to the CoS-to-local
precedence mapping table
Set the ONU port priority
Configuring traffic policing for downlink
traffic of a UNI
system-view
interface interface-type interface-number
priority-queue-mapping { downstream |
upstream } { value } &<1-8>
Reference
Assign downlink bandwidth for an ONU
Use the command...
13-7
Reference
Priority mapping on the UNI
Configuring the Priority Trust
Mode on a Port
Configure traffic policing for
downlink/uplink traffic of a UNI
Configuring SP Queuing
Configuring WFQ Queuing
Priority mapping on the ONU port
Configuring the Priority Trust
Mode on a Port
Configure traffic policing for
downlink/uplink traffic of a UNI
Remarks
—
—
Optional
For the default
mapping, see
14-1.
Table