H3C S7500E Series Configuration Manual page 34

Keyword and argument combination
acl ipv6 { access-list-number | name acl-name }
any
customer-dot1p 8021p-list
customer-vlan-id vlan-id-list
destination-mac mac-address
dscp dscp-list
ip-precedence ip-precedence-list
protocol protocol-name
qos-local-id local-id-value
service-dot1p 8021p-list
Specifies to match an IPv6 ACL specified by its
number or name. The access-list-number argument
specifies an ACL by its number, which ranges from
2000 to 3999; the name acl-name keyword-argument
combination specifies an ACL by its name.
Matches all packets (IPv6 packets are ignored on the
SC cards).
Matches the 802.1p priority of the customer network.
The 8021p-list argument is a list of up to eight 802.1p
priority values. An 802.1p priority is in the range 0 to
7.
Specifies to match the packets of specified VLANs of
user networks. The vlan-id-list argument specifies a
list of VLAN IDs, in the form of vlan-id to vlan-id or
multiple discontinuous VLAN IDs (separated by
space). You can specify up to eight VLAN IDs for this
argument at a time. VLAN ID is in the range 1 to
4094.
Matches a destination MAC address
Matches DSCP values. The dscp-list is a list of up to
eight DSCP values. A DSCP value is a number in the
range of 0 to 63 or a word representing the specific
value. For the number-to-word mapping, see
15-2.
Matches IP precedence. The ip-precedence-list is a
list of up to eight IP precedence values. An IP
precedence is in the range of 0 to 7.
Matches a protocol. The protocol-name can be IP or
IPv6.
Matches a local QoS ID, which is in the range of 1 to
4095. The local QoS IDs supported on the S7500E
series switches are from 1 to 3999.
Matches the 802.1p priority of the service provider
network. The 8021p-list argument is a list of up to
eight 802.1p priority values. An 802.1p priority is in
the range 0 to 7.
3-3
Description
Table