H3C S7500E Series Configuration Manual page 78

To do...
Set the 802.1p priority for
packets or configure the
inner-to-outer tag priority
copying function
Set the drop precedence for
packets
Set the IP precedence for
packets
Set the local precedence for
packets
Set the QoS-local-ID for
packets
Exit behavior view
Create a policy and enter
policy view
Associate the class with the
traffic behavior in the QoS
policy
Exit policy view
To an interface
To online users
Apply the
To a VLAN
QoS
policy
Globally
To the control
plane
Display the priority marking
configuration
Use the command...
remark dot1p { 8021p |
customer-dot1p-trust }
remark drop-precedence
drop-precedence-value
remark ip-precedence
ip-precedence-value
remark local-precedence
local-precedence
remark qos-local-id local-id-value
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
Applying the QoS policy to an interface
Applying the QoS policy to online users
Applying the QoS policy to a VLAN
Applying the QoS policy globally
Applying the QoS policy to the control
plane
display traffic behavior user-defined
[ behavior-name ]
9-2
Remarks
Optional
Optional
Applicable to only the
outbound direction
Optional
Optional
Optional
The QoS-local-ID is used for
identifying services and has
only local significance. By
marking different classes of
traffic with the same QoS local
ID, you can re-classify them to
apply a uniform set of QoS
actions on them.
—
—
—
—
—
—
—
—
—
Optional
Available in any view