H3C S7500E Series Configuration Manual page 35

Keyword and argument combination
service-vlan-id vlan-id-list
source-mac mac-address
system-index index-value-list
Suppose the logical relationship between classification rules is and. Note the following when using the
if-match command to define matching rules.
If multiple matching rules with the acl or acl ipv6 keyword specified are defined in a class, the
actual logical relationship between these rules is or when the policy is applied.
If multiple matching rules with the customer-vlan-id or service-vlan-id keyword specified are
defined in a class, the actual logical relationship between these rules is or.
Specifies to match the packets of the VLANs of the
operator's network. The vlan-id-list argument is a list
of VLAN IDs, in the form of vlan-id to vlan-id or
multiple discontinuous VLAN IDs (separated by
space). You can specify up to eight VLAN IDs for this
argument at a time. VLAN ID is in the range of 1 to
4094.
Matches a source MAC address
Matches a pre-defined match criterion (system-index)
for packets sent to the control plane. The
index-value-list argument specifies a list of up to eight
system indexes. The system index range is from 1 to
128.
3-4
Description