Support Of Line Cards For Traffic Redirecting - H3C S7500E Series Configuration Manual

To do...
Associate the class with the
traffic behavior in the QoS
policy
Exit policy view
To an interface
To a VLAN
Apply the
QoS
Globally
policy
To the control
plane
Generally, the action of redirecting traffic to the CPU, the action of redirecting traffic to an interface,
and the action of redirecting traffic to the next hop are mutually exclusive with each other in the
same traffic behavior.
You can use the display traffic behavior command to view the traffic redirecting configuration.
A QoS policy that contains a traffic redirecting action can be applied only to the incoming traffic.
To implement QoS policy routing successfully, ensure that the next hop address specified in the
redirect action exist and the outgoing interface is not a tunnel interface. If you fail to do that, the
matching traffic will be dropped.

Support of Line Cards for Traffic Redirecting

Table 10-1 shows the support of line cards for the traffic redirecting action for the inbound and
outbound traffic.
For line card categories and their description, see the installation manual for the S7500E series
switches.
Use the command...
classifier tcl-name behavior
behavior-name
quit
Applying the QoS policy to an interface
Applying the QoS policy to a VLAN
Applying the QoS policy globally
Applying the QoS policy to the control
plane
10-2
Remarks
—
—
—
—
—
—