5.25.4
Message Buffer API Specification
This section describes the ioctl commands used to access the receive or transmit message buffer
registers. The commands are prefixed with MSCANMB to notify user that a different module
identifier is used.
•
For the receive message buffer, use the MSCAN_RB identifier
•
For the currently selected transmit buffer, use the MSCAN_TB identifier (see more details about
buffer mapping in the MSCAN_SELECT_TXBUFF or MSCAN_SELECT_NEXT_TXBUFF ioctl
command description).
•
For a custom message buffer located in the memory (memory block copied-out of the receive buffer,
or prepared to be copied into the transmit buffer), use the memory buffer address "casted" to
arch_sMSCAN_MB pointer type.
5-1074
Targeting 56F8xxx Platform
FREESCALE SEMICONDUCTOR