Specifying The Ldap Search Timeout; Specifying The Maximum Number Of Search Items - Olympia omega 2140 User Manual

Specifying the LDAP search timeout

1
In the "LDAP SETTING" menu, press the [+] or [,] key until "LDAP TIME-
OUT" is selected, and then press the [OK] key.
2
Type in the length of time (in seconds) until the LDAP search times out.
– The timeout period can be set between 5 and 300 seconds.
3
Press the [OK] key.
After the message "ACCEPTED" appears, the "LDAP SETTING" menu ap-
pears again.

Specifying the maximum number of search items

1
In the "LDAP SETTING" menu, press the [+] or [,] key until "MAX.
SEARCH RESULTS" is selected, and then press the [OK] key.
4-41