Table of Contents
Advertisement
Item
Description
Search Method
Specify the condition for performing LDAP searches. Select "Begin", "Contain"
or "End" for the item in the search base.
Timeout
Specify the amount of time (between 5 and 300 seconds) until an LDAP search
times out.
Maximum Search
Specify the maximum number of items (between 5 and 100) that can be received
Results
as LDAP search results.
Authentication
Select the LDAP authentication method. The settings that can be specified differ
Method
depending on the selected authentication method. If "anonymous" is selected, it is
not necessary to specify the domain name, logon name and password.
LDAP Account
If any setting other than "anonymous" is selected as the authentication method,
type in the name of the LDAP account. (maximum 255 characters)
Password
If any setting other than "anonymous" is selected as the authentication method,
type in the password. (maximum 32 characters)
Domain Name
Specify the necessary domain name used to connect to the LDAP server. (maxi-
mum 64 characters)
Reminder
To change the settings on the Network tab, click the [Apply] button, and then, af-
ter "Updated Successful" appears, click the [Reset] button on the page that ap-
pears after clicking "NIC and Printer Controller Reset" in the menu under
"Maintenance" on the System tab; otherwise, the changes to the settings will not
be applied.
Note
An address search using the LDAP server can be performed from the Scan tab of
Easy Web Management.
For the attributes to be specified for "Attribute for Operation Panel" and "At-
tribute for Web Tool", consult with the network administrator.
8-75
Advertisement
Table of Contents
