Contents Contents Setting Up PC Scanning Connecting to the USB Port Installing the TWAIN Driver Installing the TWAIN Driver Using Plug and Play ......3-1 Installing the TWAIN Driver Using Plug and Play Under Windows XP ................3-1 Installing the TWAIN Driver Using Plug and Play Under Windows 2000 ................3-3 Installing the TWAIN Driver Using Plug and Play Under Windows Me/98 SE ..............3-4...
Setting Up PC Scanning Setting Up PC Scanning If the enclosed TWAIN Driver is installed on the computer, this copier can be used for to scan documents to a PC. The following software and hardware system environment is required for PC scanning.
Connecting to the USB Port Connecting to the USB Port Important! Be sure to use a shielded USB cable. Use of an unshielded cable may result in radio interference. Make sure that the copier and the computer to be connected to the copier are turned OFF.
Installing the TWAIN Driver Installing the TWAIN Driver This section describes the procedure for installing the TWAIN driver. The printer driver can be installed by using Plug and Play. Installing the TWAIN Driver Using Plug and Play Installing the TWAIN Driver Using Plug and Play Under Windows XP With Windows running, insert the CD-ROM into your computer’s CD- ROM drive.
Page 10
Installing the TWAIN Driver Click [Next]. Click [Continue Anyway]. The “Completing the Found New Hardware Wizard” dialog box ap- pears. Click [Finish]. The “Found New Hardware Wizard” dialog box appears again. Repeat steps 4 through 7. Note This completes the installation of the TWAIN driver.
Installing the TWAIN Driver Installing the TWAIN Driver Using Plug and Play Under Windows 2000 With Windows running, insert the CD-ROM into your computer’s CD- ROM drive. Turn on the copier. When the copier is ready, connect it to the computer with the USB ca- ble.
Installing the TWAIN Driver Installing the TWAIN Driver Using Plug and Play Under Windows Me/ 98 SE With Windows running, insert the CD-ROM into your computer’s CD- ROM drive. Turn on the copier. When the copier is ready, connect it to the computer with the USB ca- ble.
How to Scan Document How to Scan Document Using the Auto Document Feeder Note The Auto Document Feeder (ADF) cannot be used when True Color × or Gray (600 600 dpi) is selected for Scan Type. Select the PC software program (Imaging, Photoshop, etc.). This pro- cedure uses Microsoft Imaging as an example.
How to Scan Document Using the Original Glass Select the PC software program (Imaging, Photoshop, etc.). This pro- cedure uses Microsoft Imaging as an example. Click [File]. Click [Select Device]. Select the TWAIN driver from the dialog box, then click [OK]. Click [Acquire Image...], then adjust any settings necessary.
Common Settings Common Settings Auto Options Items Settings Original Size A4, B5, A5, FLS, Legal, Letter, Half Letter, 16K, Custom See “Original Size:” on page 5-2. Scan Type B/W (default setting), Photo, Gray, True Color See “Scan Type:” on page 5-2. * True color mode is only available for scanning through Origi- nal Glass.
Page 16
Common Settings Original Size: Select the Original Size from the pull-down list to match the size of doc- ument to be scanned. Scan Type: Scan Type pull-down list contain four options. B/W: Suitable for most text documents. Photo: Suitable for photographs. Gray: Suitable for scanning black &...
Common Settings Manual Options To enter the enhanced settings, select Manual in the Scanning mode. Items Settings Rotation None (default setting), Right 90, Left 90 Default Click [Default] to restore all the enhanced settings to their de- fault values. Brightness/Contrast -100 to 100% Sharp -2 to 3...
Page 18
Common Settings Sharp: This function is used to sharpen the image or blur it for effect. Curves: This function is used to set the gamma of the image. This function will allow you to brighten or darken the overview of the image without changing the original resolution.
Error Message Error Message Original Document Jam Message on the Control Panel: Cause Remedy • A paper misfeed occurred in the Auto Doc- • Open the Document Feeder Cover and ument Feeder. the Auto Document Feeder, and then re- • All misfed paper was not removed from the move the misfed paper.
Error Message To clear a misfeed in the Auto Document Feeder Remove the original docu- ment from the Document Feed Tray. Open the Document Feeder Cover and gently remove the misfed paper. Open the Auto Document Feeder and gently remove the misfed paper.
Error Message Memory Full Message on the Control Panel: Cause Remedy • There is not enough memory. • Press any key from Control Panel of the copier. Communication Error Message on the PC screen: Cause Remedy • PC or copier system crash during commu- 1.
Error Message Scanner Busy Message on the PC screen: Cause Remedy • If TWAIN scanning and copy jobs are being • Wait until Copy or all scanning is over. performed at the same the time, the copier may stop in the middle of scanning. Read Data Error Message on the PC screen: Cause...