Table of Contents
Advertisement
3
Type in the administrator access code, and then press the [OK] key.
–
The manufacturer's default setting is "000000".
–
If the code was incorrectly entered, press the [Clear/Stop] key to erase the
number, and then type it in correctly.
4
Press the [,] or [+] key until "USER SETTING" is selected, and then press
the [OK] key.
5
In the "USER SETTING" menu, press the [,] or [+] key until "NTP SERVER
ADDRESS" is selected, and then press the [OK] key.
6
Use the keypad to type in the NTP server address, and then press the [OK] key.
4-47
Advertisement
Table of Contents
