Olympia omega 2140 User Manual page 262

Hide thumbs Also See for omega 2140:
Table of Contents

Advertisement

Item
Description
Preferred NDS Tree
Type in the preferred NDS tree name. (maximum 63 characters, excluding / \ ; : ,
* [ ] < > | + = ? and .)
Print Queue Scan
Specify the interval for scanning the print queue. (Range: 1 to 65535 seconds)
Rate(*)
Mode(*)
Select either "PServer" or "Nprinter/Rprinter" as the operating mode for the print
server.
Printer Number
Type in the Nprinter/Rprinter printer number. (Range: 0 to 254)
Connection Mode
Specify the NetWare emulation mode. ("Directory Services (NDS)", "Bindery"
and "Directory Services/Bindery")
Reminder
To change the settings on the Network tab, click the [Apply] button, and then, af-
ter "Updated Successful" appears, click the [Reset] button on the page that ap-
pears after clicking "NIC and Printer Controller Reset" in the menu under
"Maintenance" on the System tab; otherwise, the changes to the settings will not
be applied.
After changing the settings for parameters marked with an asterisk (*), turn this
machine off, then on again.
The NetWare information that can be specified differs as shown below, depending on
the emulation mode and service mode settings selected for NetWare.
Service mode
Emulation mode
NetWare Configuration
Frame Type
Print Server Name
NDS Context Name
Print Server Password
Password Retype
Preferred File Server
Nprinter
NDS
Bindery
Enable NetWare (Select the check
box.)
AutoDetect (Select the frame type
according to the network environ-
ment.)
Print server name specified on the
NetWare server
Name of the
Not necessary to
context that
specify
connects to
PServer
Specify only when setting from the
NetWare server.
Not necessary to
Name of the file
specify
server that con-
nects to PServer
PServer
NDS
Bindery
Enable NetWare (Select the check
box.)
AutoDetect (Select the frame type
according to the network environ-
ment.)
Print server name specified on the
NetWare server
Name of the
Not necessary to
context that
specify
connects to
PServer
Specify only when setting from the
NetWare server.
Not necessary to
Name of the file
specify
server that con-
nects to PServer
8-67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omega 1640

Table of Contents