Table of Contents
Advertisement
2
Specify the desired copy settings.
For details on specifying the copy quality, refer to "Specifying the
Copy Quality" on page 93.
For details on specifying the zoom ratio, refer to "Specifying the
Zoom Ratio" on page 94.
For details on selecting the copy density, refer to "Selecting the
Copy Density" on page 95.
For details on selecting the media tray, refer to "Selecting the
Media Tray" on page 95.
For details on setting 2in1 copying, refer to "Setting 2in1 Copying"
on page 96.
For details on ID card copying, refer to "ID Card Copying" on page
97.
For details on setting duplex (Double-Sided) copying, refer to "Set-
ting Duplex (Double-Sided) Copying" on page 99.
For details on setting collated copying, refer to "Setting Collated
Copying" on page 101.
For details on setting clone copying, refer to "Setting Clone Copy-
ing" on page 102.
For details on setting poster copying, refer to "Setting Poster Copy-
ing" on page 103
3
Using the keypad, specify the desired number of copies.
If the number of copies was incorrectly entered, press the Cancel/
C key, and then specify the correct number of copies.
4
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
Copying begins.
If the Stop/Reset key is pressed while copying,
START KEY TO RESUME
the Start-B&W key or the Start-Color key. To stop copying, press
the Stop/Reset key.
Specifying the Copy Quality
The copy quality can be set according to the contents of the document.
1
Press the Quality key.
2
Press the * or ) key to select
the Menu/Select key.
The main screen appears again.
Making Basic Copies
appears. To continue copying, press
MIX, TEXT
or
PHOTO
PRESS THE
, and then press
93
Advertisement
Table of Contents
