Table of Contents
Advertisement
When "FTP Server Address" is selected:
Item
Description
Destination Name
Type in the name of the recipient. The display name appears in the control panel
display.
FTP Server Address
Specify the IP address or the host name of the FTP site where the scan data will be
sent. (maximum 64 characters)
Directory
Specify the directory on the FTP site where the scan data will be saved. (maximum
128 characters)
Use Proxy
Select this check box to access the FTP site through a proxy server.
Remote Port Number
Specify the port number (1 through 65535) for the remote host when a proxy server
is not used. Normally, port number 21 is used.
E-mail Notification
Select this check box to send an e-mail message as notification that the scan data
has been uploaded to the FTP server.
Notification Address
Type in the e-mail addresses (up to 10) of the recipients for e-mail notification.
(maximum 64 characters)
Anonymous
Select this setting when the FTP site of the recipient is an anonymous FTP server.
Private Site
Select this setting when the FTP site of the recipient requires user authentication,
and then specify the following.
User Name: Specify the user name for logging on to the FTP site. (maximum 20
characters)
Password: Specify the password for the user name for logging on to the FTP site.
(maximum 20 characters)
Confirm: Type in the same password again for confirmation.
8-57
Advertisement
Table of Contents
