Table of Contents
Advertisement
6.5
Specifying the default scanning settings
The default settings for the resolution, data format and compression encoding method
during scanning and transmission with Scan to E-mail and Scan to Server (FTP) op-
erations can be changed.
Selecting the resolution
1
Press the [Utility] key.
2
Press the [,] or [+] key until "SCAN SETTING" is selected, and then press
the [OK] key.
3
Press the [,] or [+] key until "RESOLUTION" is selected, and then press the
[OK] key.
4
Press the [,] or [+] key to select the appropriate resolution from the available
settings.
–
The settings available for the resolution are "150×150dpi", "300×300dpi"
and "600×600dpi".
6-28
Advertisement
Table of Contents
