Table of Contents
Advertisement
3
Press the [OK] key.
The message "SCANNING" appears, and the following screen appears when
scanning is finished.
–
When scanning a document that contains multiple pages, position the next
page of the document on the original glass, and then press the [OK] key.
Repeat this step until all pages of the document are scanned.
4
After all pages of the document are scanned, press the [Start] key.
A connection to the FTP server is established, and uploading begins. When the
transmission is finished, the message "COMPLETE" appears and the Scan
mode screen appears again.
Note
To stop scanning, press the [Clear/Stop] key.
If the transmission could not be completed correctly, a transmission result report
is printed.
To cancel a queued transmission of scan data, press the [Function] key, and then
select "CANCEL RESERV.". For details, refer to the User's Guide for fax kit
FAX-4000.
To change the scanning quality settings, refer to "Changing the scanning quality
settings" on page 6-19.
7-10
Advertisement
Table of Contents
