Table of Contents
Advertisement
2
Press the [,] or [+] key until "ADMIN. MANAGEMENT" is selected, and
then press the [OK] key.
3
Type in the administrator access code, and then press the [OK] key.
–
The manufacturer's default setting is "000000".
–
If the number was incorrectly entered, press the [Clear/Stop] key to erase
it, and then type it in correctly.
4
Press the [+] or [,] key until "LDAP SETTING" is selected, and then press
the [OK] key.
–
If fax kit FAX-4000 is installed
4-36
Advertisement
Table of Contents
