Changing The Image Quality Level When The Document Feeder Is Used ("Density (Adf)" Parameter) - Olympia Omega 1640 User Manual

Changing the image quality level when the document feeder is used ("DENSITY
(ADF)" parameter)
1
Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 6-6.
2
Press the [+] or [,] key until "DENSITY (ADF)" is selected, and then press
the [OK] key.
3
Press the [+] or [,] key until "MODE1" or "MODE2" is selected, and then
press the [OK] key.
The "MACHINE SETTING" menu appears again.
6-11