Cylinder Liner Inside Diameter - Measure; Cylinder Liner Flange Protrusion - Measure; Cylinder Liner - Remove - Mitsubishi S6R Series Service Manual

Chapter 5 DISASSEMBLY OF BASIC ENGINE

4.8 Cylinder Liner Inside Diameter - Measure

Measure the cylinder liner inside diameter, and know the
current condition.
For the measurement procedure, refer to "Cylinder Liner
Inside Diameter - Measure" of "ASSEMBLY OF BASIC
ENGINE."

4.9 Cylinder Liner Flange Protrusion - Measure

Measure the cylinder liner flange protrusion, and know the
current condition.
For the measurement procedure, refer to "Cylinder Liner
Flange Protrusion - Measure" of "ASSEMBLY OF BASIC
ENGINE."

4.10 Cylinder Liner - Remove

(1) Set the cylinder liner remover to the cylinder liner.
Note: Use care not to hit the piston cooling nozzle when set-
ting the remover plate to the bottom of cylinder liner.
(2) Rotate the handle, and remove the cylinder liner.
5-20
Cylinder Liner Inside Diameter - Measure
Bolt
P/N:37591-06300
Tightening torque
98 N·m
{10 kgf·m}
[72 lbf·ft]
Liner pusher
P/N:37591-06200
Cylinder Liner Flange Protrusion - Measure
Cylinder Liner - Remove
Cylinder liner Cylinder liner
Cylinder liner
Cylinder liner
flange protrusion
Cylinder liner remover Cylinder liner remover
P/N:37591-04100 P/N:37591-04100
Cylinder liner Cylinder liner