Camshaft Gear - Install; Camshaft End Play - Measure; Fuel Injection Pump Accessory Drive - Install - Mitsubishi S6R Series Service Manual

Chapter 7 ASSEMBLY OF BASIC ENGINE

4.4 Camshaft Gear - Install

(1) Install the camshaft gear by aligning its hole with the
dowel pins on camshaft.
(2) Tighten the bolts to the specified torque.
(3) Verify the camshaft smooth rotation.

4.5 Camshaft End Play - Measure

Measure the camshaft end play. If the value exceeds the
limit, find the causal parts, and replace them with new ones.
Item
Camshaft end play
[0.0039 to 0.0098 in.]

4.6 Fuel Injection Pump Accessory Drive - Install

(1) Install the O-ring to the mounting surface of the fuel
injection pump accessory drive case. Apply a thin coat
of ThreeBond 1212 to the flange.
(2) Install the fuel injection pump accessory drive to the
rear plate.
(3) Tighten the bolts to the specified torque.
7-22
Standard value Limit value
0.10 to 0.25 mm 0.40 mm
[0.0157 in.]
Camshaft Gear - Install
Camshaft End Play - Measure
108 ± 5.4 N·m
{11 ± 0.55 kgf·m}
[80 ± 4 lbf·ft]
Fuel injection pump
accessory drive
Fuel Injection Pump Accessory Drive
- Install
Camshaft gear
176 ± 8.8 N·m
{17.9 ± 0.9 kgf·m}
[130 ± 6.5 lbf·ft]