Maintenance Service Data Of Lubrication System - Mitsubishi S6R Series Service Manual

1.4 Maintenance Service Data of Lubrication System

Backlash between oil pump gear and idler gear
Drive gear and driven gear backlash
Top clearance between gear teeth and case
Side clearance between gear width and case
depth
Drive shaft outside diameter
Oil pump
Driven shaft outside diameter
Bushing inside diameter
Spindle outside diameter
Idler gear bushing inside diameter
Safety valve opening pressure
Oil filter alarm Differential pressure for activation of alarm
Relief valve Spring free length
Valve opening temperature
Oil thermostat
Temperature at which valve lift becomes
11 [0.43] or more
Oil pump idler gear and crankshaft gear backlash
Item
Nominal
Standard value
value
0.087 to 0.316
[0.0034 to 0.0124]
0.100 to 0.200
[0.0039 to 0.0079]
0.100 to 0.196
[0.0039 to 0.0077]
0.050 to 0.114
[0.0020 to 0.0045]
24.947 to 24.960
[0.9822 to 0.9827]
ø25 24.947 to 24.960
[0.98] [0.9822 to 0.9827]
25.000 to 25.021
[0.9843 to 0.9851]
24.949 to 24.960
[0.9822 to 0.9827]
ø25
[0.98]
25.000 to 25.021
[0.9843 to 0.9851]
1.4 ± 0.1 MPa
{14 ± 1 kgf/cm²}
[203 ± 14 psi]
0.15 to 0.18 MPa
{1.5 to 1.8 kgf/cm²}
[21 to 26 psi]
115 [4.53]
80 to 84°C [176 to 183.2°F]
95°C [203°F]
0.11 to 0.38
[0.0043 to 0.0150]
Chapter 2 SERVICE DATA
Unit: mm [in.]
Limit value Remarks
0.500
[0.0197]
0.400
[0.00157]
0.350
[0.0138]
0.250
[0.0098]
24.900
[0.9803]
24.900
[0.9803]
25.100
[0.9882]
24.900
[0.9803]
25.100
[0.9882]
2-11