Chapter 7 ASSEMBLY OF BASIC ENGINE
3.8 Coupling - Install
(With tachometer spec)
(1) Install the coupling aligning the dowel pin on the cam-
shaft front end, and tighten the bolt.
(2) Install the oil seal and O-ring to oil seal case, and
tighten the bolt.
Note:(a) Apply grease to the oil seal lip and the entire cir-
cumference of O-ring.
(b) Install the camshaft, then install coupling, oil seal
and oil seal case.
7-20
Coupling
Oil seal case
Oil seal
Coupling - Install