Other Features - Lucent Technologies Index User Manual

Page 18 - Other Features
Setting the Ringer Timeout
Personal Alarms
INDeX Standard Telephone User's Guide
The ringer timeout controls several actions:
– Callback: How long a callback rings before cancelling.
– Group hunting: How long calls to a group of which you are a member,
ring before trying another member.
– Divert on no answer: How long calls ring at your phone before the
system uses Divert on No Answer if set.
To set the ringer timeout:
1. Lift the handset and immediately dial 0.
2. Broken dial tone: Dial 13 (ringer timeout).
3. Loud pip: Dial the phone's passcode (see page 17).
You will then hear either:-
Continuous tone: Passcode wrong. Replace handset. Or
Three soft-tones: Timeout already set. Dial
Single soft tone: No timeout set. Dial a new timeout (0 to 999 seconds -
10 seconds
3 rings) and then dial #. Or
Broken dial tone: Ringer timeout set. Replace the handset to finish.
You can set a Personal Alarm for your phone. When it takes place, the phone
will give a repeating triple ring for 20 seconds or until you lift and replace the
handset.
– To set or alter an alarm:
Lift the handset and dial *8hhmm# where hhmm is the time in 24-hour
clock format.
– To clear an alarm before it occurs:
Lift the handset and dial *8*#.
to cancel. Or
38GDE00001SAD - Issue 8 January 2000