Other Features - Lucent Technologies INDeX 20AT User Manual

Page 22 - Other Features

Other Features

The Phone Passcode
Group
INDeX 20AT Telephone User's Guide
If the phone gives a loud pip, it requires you to dial its four-
digit passcode. The default passcode is 0000. Wrong
passcode entry more than 5 times results in the phone
becoming barred. Barred phones cannot access features
requiring passcode entry. They can make external calls but
only to special numbers, e.g. emergency numbers.
To change the phone's passcode:
1. Lift the handset and immediately dial 0.
2. Broken dial tone: Dial 70 (passcode) .
3. Loud pip: Dial the phone's 4-digit passcode.
You will then hear either:-
– Continuous tone: Passcode wrong, replace the
handset.
or Single soft tone: Dial the new four-digit passcode.
or Broken dial tone: Number okay, replace the handset
to finish.
The system can include your phone in a group (or even in
several groups). You can then take your phone in and out
of group. When 'in group', you may receive calls made to
the group number. Going into group switches Divert All and
No Calls off (see page 20).
The group's type sets which group members the system
rings when a call to the group arrives. The different types
are rotary, collective, sequential and longest waiting (see
"Error! Reference source not found." on page Error!
Bookmark not defined.).
To join/leave group:
1. Lift the handset and immediately dial 0.
2. Broken dial tone: Dial 40 (in group) or 41 (out of
group) .
3. Replace the handset to finish.
38DHB0002UKDU - Issue 1 February 2000